TESLA Roadster Car Paint Spray

Car Spray Paint TESLA



150Ml TESLA MOTORS spray paint.

Mask your scratches with a single spray for a Professional finish.

Solvent-based paint



Properties of the Spray Paint



Original manufacturer color Fast drying Excellent covering and filling power Long-lasting tint and shine Resistant to impacts and scratches Resistant to weather conditions Excellent anti-corrosion Unalterable and UV-resistant Excellent adhesion.



An innovative spray technology and nozzle is guaranteed thanks to the wide mist spray, high yield, and constant pressure for optimal application and professional final quality.



Physical and Chemical Characteristics

• 
  
  
• Volume: 142.5 ml in Spray
  
  
• Coverage: depending on the condition and color of the substrate, 400 ml cover approx. 1.25 to 1.75 m²
  
  
• Base: acrylic resin
  
  
• VOC: approximately 88% w/w V(olatile) O(rganic) C(ompounds) Extract
  
  
• Dust dry: after 5 to 10 minutes
  
  
• Touch dry: after 10 to 20 minutes
  
  
• Thoroughly dry / ready to repaint: after 2 hours
  
  
• Heat resistance: up to 110°C
  
  

Pre-treatment The surface must be clean, dry, and degreased. Remove any remnants of old paint, then sand and apply a base coat with a suitable MoTip primer. After drying, lightly sand the base coat (grit P2000).



Painting Your Car: The surface of your Car Body must be clean, dry, and degreased. Bring the aerosol to room temperature. The ideal application temperature is between 15 to 25°C. Before application, shake the aerosol well for at least 2 minutes and paint a sample. The spraying distance from the object to be painted is between 25 and 30 cm.



Apply the Car Paint in several thin layers. Before applying the next coat, shake the aerosol again. An optimal result is achieved by applying a coat of MoTip clear acrylic varnish.



After use, clear the valve by spraying the Car Spray upside down (approximately 5 seconds).



The drying time depends on the temperature, atmospheric humidity, and the thickness of the applied layer.