400ml Spray Paint for TESLA Model S, 3, X, Y
TESLA MOTORS 400Ml spray paint.
Mask your scratches with a single spray for a Professional finish.
Solvent-based paint
Pay in 4x with
Car Paint Spray TESLA
TESLA MOTORS 400Ml paint spray.
Cover up your scratches with a single spray for a Professional finish.
Solvent-based paint
Properties of the Paint Spray
Original manufacturer color Rapid drying Excellent coverage and filling power Long-lasting color and shine Resistant to impacts and scratches Weather-resistant Excellent anti-corrosion Non-fading and UV resistant Excellent adhesion.
An innovative spray technology and nozzle is guaranteed thanks to the wide mist spray, high yield, and constant pressure for optimal application and professional final quality.
Physical and Chemical Characteristics
- Volume: 400 ml in Spray
- Coverage: depending on the condition and color of the surface, 400 ml covers approx. 1.25 to 1.75 m²
- Base: acrylic resin
- VOC: approximately 88% w/w V(olatile) O(rganic) C(ompounds) Extract
- Dust dry: after 5 to 10 minutes
- Touch dry: after 10 to 20 minutes
- Thorough dry / repaint: after 2 hours
- Heat resistance: up to 110°C
Pre-treatment The surface must be clean, dry, and degreased. Remove any remnants of old paints, then sand and apply a primer coat suitable for the surface with MoTip. After drying, lightly sand (grit P2000) the primer coat.
Painting Your Car: The surface of your Car Body must be clean, dry, and degreased. Bring the aerosol to room temperature. The ideal application temperature is between 15 to 25°C. Before application, shake the aerosol well for at least 2 minutes and spray a sample. The spray distance of the object to be painted is between 25 and 30 cm.
Apply the Car Paint in several thin layers. Before applying the next coat, shake the aerosol well again. An optimal result is obtained by applying a clear acrylic varnish MoTip.
After use, purge the valve by spraying the Car Spray upside down (approximately 5 seconds).
The drying time depends on the temperature and humidity as well as the thickness of the applied coat.